Operator control enclosure has all controls for both manual and automatic operation, including hydraulic pump stop and start button, emergency stop and manual jog functions.
The 1' thick press plate is mounted to the carriage. Press plate is same size as bag pattern.
Incoming pallet scanner automatically raises carriage to a 6" clearance above an incoming load.
The flexure mounted plunger in the press place raises and activates the top layer sense switch to switch the unit from high speed to low speed.
Flexible band cable carrier keeps wire cables neat and tracking correctly.
Sides of the machine are guarded with screen panels. Panels are removable without the need for tools.
The hydraulic cylinder is mounted with a 1' thick urethane pad to provide flexibility to the cylinder as the stroke extends.
High limit, load height, and low limit proximity
switches are conveniently located at floor level for operator adjustment.
No tools are required for adjusting the switches.
High limit, load height, and low limit proximity switches are conveniently located at floor level for operator adjustment.
No tools are required for adjusting the switches.
Rugged girders support conveyor rollers 
from below during pressing. Conveyor mounts on
adjustable die spring supported cross channels to enable conveyor rollers to
come in contact with girders.